APOLLO GX50/55 GPS SAR Module Operations.


92 views
Uploaded on:
Category: Sales / Marketing
Description
Presentation. This presentation is intended to present the rudiments of the GX50/55 GPSFocus will be set on utilization of the GX50/55 for CAP operationsThis presentation is not intended to supplant hands on direction or the proprietors manualAlways utilize your Quick Reference Guide for help until you are capable utilizing this gear.
Transcripts
Slide 1

APOLLO GX50/55 GPS SAR Module Operations

Slide 2

Introduction This presentation is intended to present the essentials of the GX50/55 GPS Focus will be put on utilization of the GX50/55 for CAP operations This presentation is not intended to supplant hands on guideline or the proprietors manual Always utilize your Quick Reference Guide for help until you are capable utilizing this gear

Slide 3

GX50/55 Simulator The GX50/55 Deluxe test system is accessible for download from the Garmin site http://www8.garmin.com/incorporate/gxsimulator/SimulatorPopupGX.htm l You ought to utilize the test system to pick up capability before you get in the plane Using the bolt scratches on your console you can fly the test system The all over bolts control speed and the left right bolts control heading Be certain that you have the SAR capacity checked under the alternatives menu before you turn the test system on

Slide 4

Apollo Models Apollo GX50 – IFR enroute & approach confirmed Apollo GX55 – IFR enroute just Apollo GX60 – Same as 50 or more com radio Apollo GX65 – Same as 55 or more com radio

Slide 5

Knobology On/Off Data Card Slot Soft (Smart) Keys Hard Keys Large (Outer) Knob Small (Inner) Knob

Slide 6

Knobology "Parts" chose by the catches and, "Pages" saw by looking with the expansive and little handles

Slide 7

SAR Setup Page You may need to confirm the SAR module is initiated Press MAP to achieve the guide capacities Turn the LARGE KNOB to go to Map Setup Turn SMAL L KNOB to go to SAR Setup Press SEL to actuate the glimmering cursor Turn the SMALL KNOB to set SAR MAP ON

Slide 8

SAR Setup Page For Parallel Searches utilizing the Cell or LAT/LONG framework set GRID TYPE to BASIC and POSITION to NW which covers the majority of the US

Slide 9

SAR Setup Page Grid shows while in the BASCI (Cell or Lat/Long) framework

Slide 10

SAR Setup Page For Parallel Searches utilizing the CAP Grid System set GRID TYPE to US and POSITION to: GSW for the DFW range SAT for San Antonio territory ELP for El Paso zone HOU for Houston region

Slide 11

SAR Setup Page Grid shows while in the US (CAP) framework

Slide 12

SAR Setup Page Grid shows while in the US (CAP) framework

Slide 13

SAR Setup Page Grid shows while in the US (CAP) framework

Slide 14

SAR Setup Page Grid shows while in the US (CAP) framework

Slide 15

SAR Setup Page Set Map Orientation to (Track Up) Set Route Line to YES

Slide 16

SAR MAP GRD controls network line show MRK is utilized to stamp a SAR position PAT is utilized to choose a hunt design

Slide 17

Marking a SAR Find or Waypoint While in the SAR screen press the MRK delicate key

Slide 18

Marking a SAR Find or Waypoint A screen demonstrating your momentum position will show up and it will request that you name this SAR Waypoint Follow the same methods as you would to name some other waypoint - Inner Knob to change, Outer Knob to move cursor, Enter to acknowledge Write down the SAR # and Lat/Lon on your log before you leave this screen. You need to make sure that you have a precise record of every single conceivable find!

Slide 19

Marking a SAR Find or Waypoint Note that the SAR Waypoint that we just made does not appear on the SAR Map Screen when the networks are being shown. To see it on the guide, you need to either kill the lattice show or turn the Outer Knob to one of the other Map Screens. Likewise take note of that the USR Soft Key must be on to see client waypoints. It is found on page #2 of the Wide Screen or Split Screen Maps

Slide 20

SAR Search Patterns The SAR Module will mechanize the flying of four pursuit designs Route Search with balance Creeping Line Search Expanding Square Search Parallel or Grid Search

Slide 21

Route Search Setup NAV FPL

Slide 22

Route Search Setup Turn Outer Knob to Create Flight Plan Press SEL and enter a FPL name

Slide 23

Route Search Setup Turn Inner Knob to choose first letter Turn Small Knob Outer Knob to move to next position Repeat until done Press Enter Press Enter Press Select

Slide 24

Route Search Setup Select begin point utilizing Inner and Outer handles Hit Enter to stack next waypoint Repeat last strides Press Enter when done Your Flight Plan is presently stacked into the database and can be recovered whenever Once you have your waypoints stacked hit Select to acknowledge the flight arrangement

Slide 25

Route Search Setup Activate the Flight Plan (FPL) NAV Select Turn Outer Knob to the sought flight arrangement FPL Enter to enact Flight arrangement is currently dynamic

Slide 26

Route Search Setup Set the Route Offset SEL NAV Use Outer Knob to move between fields – Inner Knob to change Outer Knob to Parallel Track Press Enter to finish setup

Slide 27

Creeping Line Search Setup Direction of Search [Spacing] [ Leg Length ] s

Slide 28

Creeping Line Search Setup Press the example delicate key (PAT)

Slide 29

Creeping Line Search Setup Turn the Small Knob until you see Creeping Line Search Page Press ENTER to choose the Creeping Line design

Slide 30

Creeping Line Search Setup Press SEL to choose a beginning waypoint and enter the hunt parameters

Slide 31

Creeping Line Search Setup Press ENTER to acknowledge the beginning waypoint and enter the inquiry parameters

Slide 32

Creeping Line Search Setup Turn SMALL KNOB to change the track separating (0.2 – 5.0 NM) Then BIG KNOB to move blazing cursor to Direction

Slide 33

Creeping Line Search Setup Turn SMALL KNOB to change the course heading (DIRECTION) you need to fly crosswise over and after that ENTER to acknowledge Turn SMALL KNOB again to go to the following page for LEG LENGTH

Slide 34

Creeping Line Search Setup Press SEL to alter leg length Turn SMALL KNOB to change the leg length (0.1 – 9.9 NM) Turn LARGE KNOB to move blazing cursor to Start side Turn SMALL KNOB to choose left or right half of your Direction

Slide 35

Creeping Line Search Setup Press ENTER to acknowledge your begin indicate and ENTER again come back to the guide page where you\'re Creeping Line seek course will be shown

Slide 36

Expanding Square Search Setup Spacing is steady however leg length increments with every turn S

Slide 37

Expanding Square Search Setup In the SAR map page press the PAT delicate key

Slide 38

Expanding Square Search Setup Turn the SMALL KNOB until you see the Expanding Square page then press ENTER

Slide 39

Expanding Square Search Setup Press SEL and afterward ENTER to choose the begin waypoint

Slide 40

Expanding Square Search Setup Turn SMALL KNOB to choose the sort of waypoint (APT, VOR, USER, and so on.) Turn LARGE KNOB to move the glimmering cursor Press ENTER to acknowledge the beginning waypoint

Slide 41

Expanding Square Search Setup Turn SMALL KNOB to set the Spacing (0.2 – 5.0 NM) Turn LARGE KNOB to move the glimmering cursor

Slide 42

Expanding Square Search Setup Turn SMALL KNOB to set the Direction of the main leg Press ENTER to acknowledge then press ENTER again to do a reversal to the guide page

Slide 43

Expanding Square Search Setup The Expanding Square is shown on the guide page and the information sent to the GPS CDI

Slide 44

Parallel (Grid) Search Setup CAP or Conventional Grid System

Slide 45

Parallel (Grid) Search Setup CAP or Conventional Grid System 1 Full 15\'x15\' matrix is subdivided into four 7.5\'x7.5 moment lattices marked A-B-C-D 2 A B The Apollo SAR programming further assigns the passage point corners of the framework as 1-2-3-4 C D 3 4

Slide 46

Parallel (Grid) Search Setup For Parallel Searches utilizing the CAP Grid System set GRID TYPE to US and POSITION to: GSW for the DFW zone SAT for San Antonio region ELP for El Paso territory HOU for Houston region

Slide 47

Parallel (Grid) Search Setup Parallel Search utilizing CAP Grid System As a part of the SAR map page press the PAT delicate key

Slide 48

Parallel (Grid) Search Setup Parallel Search utilizing CAP Grid System Turn the SMALL KNOB until you see the Parallel Line page then press ENTER

Slide 49

Parallel (Grid) Search Setup Parallel Search utilizing CAP Grid System Press SEL then utilize the SMALL KNOB to change information the LARGE KNOB to move the blazing cursor Set the Grid (and sub-network if necessary) and the section point corner 1 = NW, 2 = NE, 3 = SE, 4 = SW Set the track dividing (0.2 – 5.0 NM) Set the pursuit track bearing N/S or E/W

Slide 50

Parallel (Grid) Search Setup Parallel Search utilizing CAP Grid System Press ENTER to acknowledge your entrance and ENTER again to come back to the guide page where your Parallel Search is demonstrated The information is sent to the GPS CDI and the GPS will call your turns in light of your flow speed by means of the MSG capacity

Slide 51

Parallel (Grid) Search Setup New, Cell, or LAT/LONG Grid System Currently utilized as a part of Texas Wing

Slide 52

Parallel (Grid) Search Setup For Parallel Searches utilizing Cell or LAT/LONG set GRID TYPE to BASIC and POSITION to NW which covers the greater part of the US

Slide 53

Parallel (Grid) Search Setup Parallel Search utilizing Cell Grid System Turn the SMALL KNOB to the SAR Position page Press SEL and utilize the SMALL KNOB to change the information and the LARGE KNOB to move the blazing cursor Set the LAT/LONG to the 10 0 x 10 0 framework closest your inquiry region and press ENTER to acknowledge

Slide 54

Parallel (Grid) Search Setup Parallel Search utilizing Cell Grid System As a part of the SAR map page press the PAT delicate key

Slide 55

Parallel (Grid) Search Setup Parallel Search utilizing Cell Grid System Turn the SMALL KNOB until you see the Parallel Line page then press ENTER

Slide 56

Parallel (Grid) Search Setup Parallel Search utilizing Cell Grid System 100 90 40 97 101 37 30 33

Slide 57

Parallel (Grid) Search Setup Parallel Search utilizing Cell Grid System 98 97 34 37BC3 33 Lat and 97 Long

Slide 58

Parallel (Grid) Search Setup Parallel Search utilizing Cell Grid System Press SEL then utilize the SMALL KNOB to change information the LARGE KNOB to move the blazing cursor Set the Grid

Recommended
View more...