Drill Press .

Uploaded on:
Category: Travel / Places
Drill Press. The drill press is the favored device for making openings in materials. . Distinct options for the Drill Press. There are numerous approaches to bore openings in material You could utilize a manual hand drill. Distinct options for the Drill Press. There are numerous approaches to bore openings in material
Slide 1

Penetrate Press The bore press is the favored apparatus for making openings in materials.

Slide 2

Alternatives to the Drill Press There are numerous approaches to penetrate gaps in material You could utilize a manual hand bore.

Slide 3

Alternatives to the Drill Press There are numerous approaches to bore openings in material You could utilize an electric module or cordless hand drills.

Slide 4

Drill Press Uses The bore press can be utilized for an assortment of uses. It might be utilized to penetrate through metals, woods, plastics, Wood Plastics Metal

Slide 5

Drill Bits for the Drill Press You may utilize an assortment of bores on the bore press.

Slide 6

Drill Press Safety Wear eye assurance at all circumstances. Try not to work the penetrate press until you have passed all wellbeing necessities.

Slide 7

Drill Press Safety Always ensure that little stock is safely clasped in a bore squeeze tight clamp. Try not to attempt to hold little bits of stock by hand. Put the long end of the piece being bored to one side. This is so it will hit the post and not the administrator, ought to the material slip and begin turning.

Slide 8

Chuck Key On/Off Switch Depth Stop Feed Handle Table Chuck Column

Slide 9

Drill Press Safety Always evacuate the toss key quickly subsequent to introducing a bit. Put enter back in holder Never wear gloves while working the penetrate press. They may get got.

Slide 10

Drill Press Safety Do not wear your hair long, or wear long sleeves or dangling strings or adornments. Tuck it in or tie it back! Back the bit out much of the time on profound cuts, to spotless and cool the bit.

Slide 11

Drill Press Safety Make certain the table and penetrate are appropriately changed in accordance with abstain from boring into the table. Try not to converse with anybody while working the machine.

Slide 12

Drill Press Safety One individual machine-99% of the time. Make all alterations with the power off and the bit stopping.

Slide 13

Drill Press Safety Use mind in stretching around the machine. Never expel chips with your fingers. Keep them far from the rotating tool.

Slide 14

Drill Press Safety Loose apparel must be secured and sleeves pulled up to exposed lower arms Long hair must be tied back or wear a cap.

Slide 15

Drill Press

Slide 16

Overview Used for boring or drilling gaps

Slide 17

Always wear your wellbeing glasses

Slide 19

Select a bore

Slide 20

Twist Bits Sizes extend: 1/16" to 1/2"

Slide 21

Spade Bits Sizes go: 1/4" to 1"

Slide 22

Forstner Bits Sizes run: 1/4" to 2"

Slide 23

Insert bit into hurl Tighten it by hand

Slide 24

Find the throw key… … in the key toss holder

Slide 25

Tighten with toss key Remember: Righty Tighty

Slide 26

Set profundity stop… … to wanted tallness

Slide 27

Never leave the… … enter toss in the toss

Slide 28

Put the toss key… … in the toss key holder

Slide 29

Use the encourage handle… … lower and raise the bit

Slide 30

Hold your stock… … firmly as you penetrate

Slide 31

If not, your stock may… … turn fiercely around

Slide 32

Hold the bolster handle… … and kill the machine

Slide 33

Small pieces ought to… … be clipped to the table

Slide 34

Keeps hands no less than… 2" 2" … "Hover of Danger"

Slide 35

Keep hair, free garments … far from the bit

Slide 36

Press the stop catch… … to stop the bore press

Slide 37

Before you begin… … answer these inquiries Is this piece too little to hold? What estimate opening am I boring?

Slide 38

Review What is the edge of wellbeing on the bore press? 2 inches-Circle of Danger What things ought to be avoided the rotating bore? Long hair, shirtsleeves, loose coats, adornments and hands

Slide 39

Review What would it be a good idea for you to do if your stock begins to turn in the bore press? While holding the encourage handle down, kill the machine Where ought to the hurl key be when beginning the penetrate press? In it\'s holder

Slide 43

Questions? Remarks?

View more...