Understanding Different Types of Hospital Beds

1. Bed Making

2. Types of Beds 1. Gatch Bed Hospital bed that can be manually raised and lowered by turning cranks located at the bottom of the bed. 2. Electric Bed Similar to the gatch bed, but is operated electrically and can be managed by most patients/residents. 3. Clinitron This is a bed available for the treatment of patients with multiple or advanced pressure ulcers, grafts, burns, and intractable pain. Bed supports the body evenly Filled with a sand-like material Warm, dry air circulates through the material to maintain even temperature and supports the body evenly

3. If you encounter a bed that is unfamiliar, always ask for assistance!

4. Purpose of making a neat, clean bed Helps make residents comfortable. By keeping beds clean, dry, and wrinkle-free, making a neat, clean bed prevents skin breakdown and decubitus ulcers.

5. Frequency of changing bed linens Linens are changed as needed. Usually a full change of linens occurs on bath/shower days for residents/patients.

6. Types of beds Closed bed one with the linens pulled to the top of the bed. 1. The resident will not use the bed during the day 2. The bed is ready for a new resident Open bed one where the linens are folded back so the resident can climb into the bed during the day as needed. 1. Top linens are folded back 2. The resident uses this bed throughout the day.

7. Types of beds Occupied bed a bed made with the resident in the bed. Toe pleats can be placed on occupied beds to reduce the pressure on the patients toes. Unoccupied bed a bed made without the resident in the bed.

8. Types of beds Surgical bed made so the resident/patient can be moved from a stretcher to the bed without having to struggle with linens. 1. The bed is left at stretcher height 2. The sheets are folded away from the side where the patient will enter. 3. Sometimes the pillow is placed on the nightstand by the bed until the patient is safely in the bed. 4. This procedure differs from one facility to another.

9. Rules for handling linens A. Follow the rules of medical asepsis 1. Wear gloves when handling soiled linen 2. Wash hands before handling clean linen 3. Because the uniform is considered to be dirty, the clean linens should never touch the uniform, but held away from the body. 4. Never shake linens since this causes the spread of microorganisms. 5. Clean linens are placed on clean surfaces. 6. Dirty linens are never placed on the floor. Place soiled linen in the proper receptacle.

10. Rules for handling linens B. Clean linens are collected in the order that they will be used 1. mattress pad 2. bottom sheet 3. drawsheet 4. bed protector 5. top sheet 6. blanket 7. bedspread 8. pillowcase(s)

11. Rules for handling linens C. Place linens on the bed with the hem edges away from the patient. D. Any linen brought into a resident/patients room must stay there because it is considered to be contaminated. E. Other linens can be collected when collecting the bed linens, i.e. towels, washcloths, gowns, bath blanket. F. When removing dirty linens roll them away from you. The side of the linen that touched the resident is rolled inside.

12. Rules for handling linens G. Linen should always be stored in an enclosed linen cart. It should never be left uncovered on a cart in the hallway. H. Never apply the pillowcase by securing the pillow under the chin and sliding the pillow into the case.

13. General rules for making the bed A. Use good body mechanics B. Follow rules of medical asepsis standard precautions C. Linens must be tight and wrinkle free D. Make as much of one side of the bed as possible before going to the other side. This saves time and energy. E. A common element in all bed making is leaving the unit neat and tidy.

14. Videos Making an Unoccupied Bed Making an Occupied Bed