Federal Aviation Administration Seat Cushion Oil Burner Round Robin Update at IAMFTWG Meeting

Federal Aviation Administration Seat Cushion Oil Burner Round Robin Update at IAMFTWG Meeting
paly

This presentation, given by Tim Salter from the FAA Technical Center, provides an update on the seat cushion oil burner round robin testing conducted by

About Federal Aviation Administration Seat Cushion Oil Burner Round Robin Update at IAMFTWG Meeting

PowerPoint presentation about 'Federal Aviation Administration Seat Cushion Oil Burner Round Robin Update at IAMFTWG Meeting'. This presentation describes the topic on This presentation, given by Tim Salter from the FAA Technical Center, provides an update on the seat cushion oil burner round robin testing conducted by. The key topics included in this slideshow are . Download this presentation absolutely free.

Presentation Transcript


Slide1Presented to:By: Date: Federal Aviation Administration International Aircraft Materials Fire Test Working Group Meeting Seat Cushion Oil Burner Round Robin Update International Aircraft Materials Fire Test Working Group Tim Salter, FAA Technical Center June 25-26, 2014, Solothurn, Switzerland

Slide22Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland Introduction • Previous interlab studies had shown the NexGen burner test results to be less repeatable than originally thought – Within a single lab, as well as among multiple test labs • In the case of the Park burner, the stator and turbulator inside the burner draft tube could be adjusted to compensate for any irregularities in burner performance which might impact test results • The NexGen burner was designed to be setup in a standardized configuration, meaning that there are no adjustments to be made in order to simplify NexGen burner test rig setup • Flames coming from the NexGen burner cone were often bias to the left or right side, rather than exiting evenly from the cone • It was thought that redesigning the internal components of the NexGen burner may help reduce flame bias and increase test repeatability

Slide33Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland Old Vs. New Burner Internals • The original concept was to retain the same internals from the Park burner for use in the NexGen burner in order to keep burner performance similar • After trialing the igniterless stator design with no success, other options were considered • Oil burners on the market today no longer use stators and turbulators to direct the flow of air through the burner • Flame retentions heads (FRH) are now used in their place – Generate a more efficient and complete combustion – Simpler in design – Relatively easier to produce Turbulator Static Plate Stator Flame Retention Head

Slide44Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland FRH vs. Stator and Turbulator Flame Retention Head Stator and Turbulator

Slide55Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland NexGen Burner Settings for 2013 Seat Cushion Flammability Round Robin • Face of FRH to nozzle tip:  1-1/8” • Fuel nozzle adapter to static plate: 2-3/8” • Static Plate Angle:  centerline of igniters at  0 ° – Looking into the cone of the burner, the centerline between the igniters will be at  0 ° on the burner reference • Fuel pressure: 108 psi (+/- 4 psi) – This pressure is to be used as a starting point when flow checking the fuel flow rate • Air pressure: 45 psi • Air Temperature: 40-60°F • Fuel Temperature: 32-52°F

Slide66Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland Test Materials • All participating labs provided with cushions for testing purposes • 3 different foam cushion types will be provided – Airflex fire hardened foam – Dax fire hardened foam – Fire retarded polyurethane foam with a fire blocking layer • There will be 3 cushion sets of each cushion type provided – 9 samples total • Testing should be performed as described in the Rule or Fire Test Handbook

Slide77Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland FAA Initial Test Results using the FRH with the NexGen Burner % Weight Loss for each Cushion Sample Set Tested using Delavan W nozzle and 45 psi air pressure Airflex Fireblock Dax Sample #1 7.50% 7.42% 6.58% Sample #2 7.25% 7.64% 7.43% Sample #3 6.93% 6.12% 7.72% Average 7.22% 7.06% 7.24% Stdev 0.287 0.82 0.594 %Stdev 3.97 11.67 8.20

Slide88Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland 2013 Round Robin Test Results

Slide99Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland 2013 Round Robin Test Results

Slide1010Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland 2013 Round Robin Test Results

Slide1111Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland 2013 Round Robin Test Results

Slide1212Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland 2013 Round Robin Test Results • No average weight loss % failures have been experienced in a lab for the 2013 round robin • %Stdev results are above the preferred 10% limit when comparing all lab’s results Average Weight Loss % Results   Fireblock Dax Airflex Lab A 7.06 7.24 7.22 Lab B 7.35 8.38 7.35 Lab C 3.63 4.25 5.55 Lab D 5.60 7.58 8.32 Lab E 7.57 9.36 8.87 Lab F 7.23 7.70 5.73 Lab G 6.42 6.63 7.00 Lab H       Lab I       Lab J       Avg 6.41 7.31 7.15 Stdev 1.40 1.60 1.22 %Stdev 21.83 21.94 17.10

Slide1313Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland 2013 Round Robin Test Results • The data on the previous slide shows the %Stdev among the participating labs to be elevated • Results are likely due to different configurations of labs (test area size, ventilation, etc.) • However, when examining the results of one lab at a time, there appears to be much higher consistency • The graph shown (right) shows the %Stdev for weight loss percent within each particular lab • Variations in test results not likely caused by burner

Slide1414Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland Conclusion of 2013 Seat Cushion Round Robin Turbulator Static Plate Stator Flame Retention Head

Slide1515Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland Questions?

Slide1616Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland 2012 Round Robin Test Results   Fireblock Dax Airflex Lab A 7.55 7.00 7.55 Lab B 11.02 5.85 8.52 Lab C 4.69 6.60 6.66 Lab D 6.50 8.97 7.93 Lab E 8.97 7.55 5.94 Lab F 10.18 7.10 6.45 Lab G   Lab H       Avg 8.15 7.18 7.17 stdev 2.37 1.05 0.98 %stdev 29.09 14.57 13.72 • FAA is Lab A

Slide1717Federal Aviation Administration Seat  Cushion Oil Burner Round Robin Update IAMFTWG, June  25-26 , 2014, Solothurn,  Switzerland 2012 Round Robin Test Results • Lab at far left is FAA Technical Center

Related