Total Quality Management Defined • Quality Specifications and Costs • Six Sigma Quality and Tools • External Benchmarking • ISO 9000 • Service Quality Measurement OBJECTIVES
Total Quality Management (TQM) • Total quality management is defined as managing the entire organization so that it excels on all dimensions of products and services that are important to the customer
Quality Specifications • Design quality: Inherent value of the product in the marketplace • Dimensions include: Performance, Features, Reliability/Durability, Serviceability, Aesthetics, and Perceived Quality. • Conformance quality: Degree to which the product or service design specifications are met
Appraisal Costs External Failure Costs Prevention Costs Internal FailureCosts Costs of Quality Costs of Quality
Six Sigma Quality • A philosophy and set of methods companies use to eliminate defects in their products and processes • Seeks to reduce variation in the processes that lead to product defects • The name, “six sigma” refers to the variation that exists within plus or minus six standard deviations of the process outputs
Six Sigma Quality (Continued) • Six Sigma allows managers to readily describe process performance using a common metric: Defects Per Million Opportunities (DPMO)
Six Sigma Quality (Continued) Example of Defects Per Million Opportunities (DPMO) calculation. Suppose we observe 200 letters delivered incorrectly to the wrong addresses in a small city during a single day when a total of 200,000 letters were delivered. What is the DPMO in this situation? So, for every one million letters delivered this city’s postal managers can expect to have 1,000 letters incorrectly sent to the wrong address. Cost of Quality: What might that DPMO mean in terms of over-time employment to correct the errors?
Six Sigma Quality: DMAIC Cycle • Define, Measure, Analyze, Improve, and Control (DMAIC) • Developed by General Electric as a means of focusing effort on quality using a methodological approach • Overall focus of the methodology is to understand and achieve what the customer wants • A 6-sigma program seeks to reduce the variation in the processes that lead to these defects • DMAIC consists of five steps….
Six Sigma Quality: DMAIC Cycle (Continued) 1. Define (D) Customers and their priorities 2. Measure (M) Process and its performance 3. Analyze (A) Causes of defects 4. Improve (I) Remove causes of defects 5. Control (C) Maintain quality
Example to illustrate the process… • We are the maker of this cereal, which is advertised 16 ounces per box. Consumer Reports has just published an article that shows that we frequently have less than 15 ounces of cereal in a box. • What should we do?
Step 1 - Define • What is the critical-to-quality characteristic? • The CTQ (critical-to-quality) characteristic in this case is the weight of the cereal in the box.
2 - Measure • How would we measure to evaluate the extent of the problem? • What are acceptable limits on this measure?
2 – Measure (continued) • Let’s assume that the government says that we must be within ± 5 percent of the weight advertised on the box. • Upper Tolerance Limit = 16 + .05(16) = 16.8 ounces • Lower Tolerance Limit = 16 – .05(16) = 15.2 ounces
2. Measure (continued) • We go out and buy 1,000 boxes of cereal and find that they weight an average of 15.875 ounces with a standard deviation of .529 ounces. • What percentage of boxes are outside the tolerance limits?
Process Mean = 15.875 Std. Dev. = .529 Upper Tolerance = 16.8 Lower Tolerance = 15.2 What percentage of boxes are defective (i.e. less than 15.2 oz)? Z = (x – Mean)/Std. Dev. = (15.2 – 15.875)/.529 = -1.276 NORMSDIST(Z) = NORMSDIST(-1.276) = .100978 Approximately, 10 percent of the boxes have less than 15.2 Ounces of cereal in them!
Step 3 - Analyze - How can we improve the capability of our cereal box filling process? • Decrease Variation • Center Process • Increase Specifications
Step 4 – Improve – How good is good enough?Motorola’s “Six Sigma” • 6s minimum from process center to nearest spec
Motorola’s “Six Sigma” • Implies 2 ppB “bad” with no process shift • With 1.5s shift in either direction from center (process will move), implies 3.4 ppm “bad”.
Step 5 – Control • Statistical Process Control (SPC) • Use data from the actual process • Estimate distributions • Look at capability - is good quality possible • Statistically monitor the process over time
Analytical Tools for Six Sigma and Continuous Improvement: Flow Chart No, Continue… Material Received from Supplier Inspect Material for Defects Defects found? Yes Can be used to find quality problems Return to Supplier for Credit
0.58 Diameter 0.56 0.54 0.52 0.5 0.48 0.46 0.44 1 2 3 4 5 6 7 8 9 10 11 12 Time (Hours) Analytical Tools for Six Sigma and Continuous Improvement: Run Chart Can be used to identify when equipment or processes are not behaving according to specifications
Analytical Tools for Six Sigma and Continuous Improvement: Pareto Analysis Can be used to find when 80% of the problems may be attributed to 20% of the causes 80% Frequency Design Assy. Instruct. Purch. Training
Analytical Tools for Six Sigma and Continuous Improvement: Checksheet Can be used to keep track of defects or used to make sure people collect data in a correct manner Monday • Billing Errors • Wrong Account • Wrong Amount • A/R Errors • Wrong Account • Wrong Amount
Analytical Tools for Six Sigma and Continuous Improvement: Histogram Can be used to identify the frequency of quality defect occurrence and display quality performance Number of Lots 0 1 2 3 4 Defectsin lot Data Ranges
Machine Man Effect Environment Method Material Analytical Tools for Six Sigma and Continuous Improvement: Cause & Effect Diagram The results or effect Possible causes: Can be used to systematically track backwards to find a possible cause of a quality problem (or effect)
UCL 1020 1010 1000 LCL 990 980 970 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Analytical Tools for Six Sigma and Continuous Improvement: Control Charts Can be used to monitor ongoing production process quality and quality conformance to stated standards of quality
Other Six Sigma Tools • Failure Mode and Effect Analysis (DMEA) is a structured approach to identify, estimate, prioritize, and evaluate risk of possible failures at each stage in the process • Design of Experiments (DOE) a statistical test to determine cause-and-effect relationships between process variables and output
Six Sigma Roles and Responsibilities • Executive leaders must champion the process of improvement • Corporation-wide training in Six Sigma concepts and tools • Setting stretch objectives for improvement • Continuous reinforcement and rewards
The Shingo System: Fail-Safe Design • Shingo’s argument: • SQC methods do not prevent defects • Defects arise when people make errors • Defects can be prevented by providing workers with feedback on errors • Poka-Yoke includes: • Checklists • Special tooling that prevents workers from making errors
ISO 9000 • Series of standards agreed upon by the International Organization for Standardization (ISO) • Adopted in 1987 • More than 100 countries • A prerequisite for global competition? • ISO 9000 directs you to "document what you do and then do as you documented"
Three Forms of ISO Certification 1. First party: A firm audits itself against ISO 9000 standards 2. Second party: A customer audits its supplier 3. Third party: A "qualified" national or international standards or certifying agency serves as auditor
External Benchmarking Steps 1. Identify those processes needing improvement 2. Identify a firm that is the world leader in performing the process 3. Contact the managers of that company and make a personal visit to interview managers and workers 4. Analyze data
Service Quality Measurement:Servqual • A perceived service quality questionnaire survey methodology • Examines “Dimensions of Service Quality” including: Reliability, Responsiveness, Assurance, Empathy, and Tangibles (e.g., appearance of physical facilities, equipment, etc.)
Service Quality Measurement: Servqual (Continued) • New version of this methodology is called “e-Service Quality” dealing service on the Internet • Dimensions of Service Quality on the e-Service methodology include: Reliability, Responsiveness, Access, Flexibility, Ease of Navigation, Efficiency, Assurance/Trust, Security/Privacy, Price Knowledge, Site Aesthetics, and Customization/Personalization
Question Bowl Which of the following are Dimensions of Design Quality? • Performance • Durability • Aesthetics • All of the above • None of the above Answer: d. All of the above
Question Bowl Approximately what percentage of every sales dollar is allocated to the “cost of quality”? • Less than 5% • About 10% • Between 15 and 20 % • More than 30% • None of the above Answer: c. Between 15 and 20 % (for cost of reworking, scrapping, repeated service, etc.)
Question Bowl Which of the following are classifications of the “cost of quality”? • Appraisal costs • Prevention costs • Internal failure costs • External failure costs • All of the above Answer: e. All of the above
Question Bowl Which of the following are functions of a quality control department? • Testing product designs for reliability • Gathering product performance data • Planning and budgeting the QC program • All of the above • None of the above Answer: d. All of the above
Question Bowl Which of the following is a Critical Customer Requirement (CCR) in the context of a Six Sigma program? • DMAIC • DPMO • PCDA • DOE • None of the above Answer: e. None of the above (The CCR is the criteria that is used to define desired quality. Processing a loan in 10 days is an example of a CCR.)
Question Bowl The DMAIC cycle of Six Sigma is similar to which of the following quality management topics? • Continuous improvement • Servqual • ISO 9000 • External benchmarking • None of the above Answer: a. Continuous improvement
Question Bowl The “A” in DMAIC stands for which of the following? • Always • Accessibility • Analyze • Act • None of the above Answer: d. Analyze (Define, Measure, Analyze, Improve and Control)
Question Bowl Which of the following analytical tools depict trends in quality data over time? • Flowcharts • Run charts • Pareto charts • Checksheets • Cause and effect diagrams Answer: b. Run charts