Wellbeing Safety Orientation HSO - PowerPoint PPT Presentation

health safety orientation hso l.
Skip this Video
Loading SlideShow in 5 Seconds..
Wellbeing Safety Orientation HSO PowerPoint Presentation
Wellbeing Safety Orientation HSO

play fullscreen
1 / 56
Download Presentation
luthando-morin
Views
Download Presentation

Wellbeing Safety Orientation HSO

Presentation Transcript

  1. Health & Safety Orientation (HSO) Health, Safety & Environment Department 11.14.52.1 Rev. 2

  2. Introduction & Troubleshooting Health and Safety Orientation (HSO) is mandatory for all individuals who require unescorted access at the CLS facility and is a prerequisite for all HSE training. Viewing PowerPoint Presentations: Troubleshooting Please note there are sounds files included in the HSO PowerPoint presentation. Below are a few tips if you have trouble viewing or hearing any of the slides (assistance from a system administrator may be required if you do not have sufficient privileges). • Try running a Windows Update to ensure that Internet Explorer and Windows Media Player are both up to date. • Download java virtual machine from http://java.com/en/index.jsp (click download, appropriate software will be installed). • Please notify the CLS User Services Office if you encounter problems with the presentation including sounds, pictures, or text. clsuo@lightsource.ca or (306) 657-3700 11.14.52.1 Rev. 2

  3. Outline • Introduction • Regulatory requirements • Building access • Emergency information • Hazard identification • Additional Resources 11.14.52.1 Rev. 2

  4. HSO • HSO is a prerequisite to all HSE Training. • HSO is mandatory for personnel who require unescorted access into CLS Free Access Zone • Visitors are not required to take this course but they must be escorted by a properly trained person at all times. • Access to Controlled Areas within Restricted Access Zone requires additional training. • HSO expires after 2 years, retraining will be required with option of testing out (challenging). • Refresher HSO training will be required for significant changes in site operations or safety and regulatory requirements. • Participants will demonstrate their knowledge by scoring 80% or more on a written examination. 11.14.52.1 Rev. 2

  5. Completion of HSO • Upon successful completion of HSO, you will: • Be qualified to access all areas designated as Free Access Zone. • Be qualified to escort visitors within the Free Access Zone. • Be issued an ID Badge and Security Access Card • If required, be designated a NEW (Nuclear Energy Worker, as defined under CNSC). Contact HSE Dept. for further info. • Be issued a TLD (Thermo Luminescent Dosimeter) to monitor your radiation dose exposures at the CLS facility. • Attendance at HSO is documented on HSE training attendance database. 11.14.52.1 Rev. 2

  6. Objectives of HSO This course will include: • Necessary information to safely evacuate the building. • Information on the access zones, controlled areas and their associated hazards. • Identification of main hazards at the CLS facility • General HSE information and other HSE Training 11.14.52.1 Rev. 2

  7. Module 1 Introduction 11.14.52.1 Rev. 2

  8. What is the Canadian Light Source (CLS)? • The CLS facility is a national science research laboratory for the production of bright infrared, ultraviolet and X-ray light. • The CLS is the only facility of its kind in Canada. • Known as the “Synchrotron Facility” 11.14.52.1 Rev. 2

  9. Who owns the CLS? • The University of Saskatchewan (U of S) is the owner of the CLS facility. • The U of S has established the Canadian Light Source Inc. (CLSI) to lead the construction project and to operate the facility upon completion. • The CLSI is a “not-for–profit” corporation. 11.14.52.1 Rev. 2

  10. CLSI Health Safety Environment CLSI HSE DEPARTMENT 11.14.52.1 Rev. 2

  11. Area Designations • The CLS Facility is divided into Zones and Controlled Areas to regulate access and to ensure personnel safety • Access to the CLS Controlled Areas depends on your requirement and training. • The CLS Zone designations are: • Public Access Zone (PAZ) • Free Access Zone (FAZ) • Restricted Access Zone (RAZ) 11.14.52.1 Rev. 2

  12. Access Zones • Public Access Zone (PAZ) • PAZ includes the lobby area within the CLS facility and areas outside the CLS facility. • Free Access Zone (FAZ) • FAZ includes areas where hazards are expected to be low. • Restricted Access Zone (RAZ) • RAZ encompasses all areas where there may be radiological and/or industrial hazards. • Industrial Controlled Area (ICA) • Radiological Controlled Area (RCA) which include • Radiological Storage Area (RSA) • High Radiation Area (HRA) 11.14.52.1 Rev. 2

  13. Access Zones First Floor Second Floor Free Access Zone Industrial Controlled Area Radiological Controlled Area 11.14.52.1 Rev. 2

  14. Module 2 Regulatory Requirements 11.14.52.1 Rev. 2

  15. Saskatchewan Occupational Health and Safety Act & Regulations Who is responsible for health and safety? Everyone!! 11.14.52.1 Rev. 2

  16. CLSI HSE Policy “CLSI is committed to provide a safe and healthful working environment for all staff and to protect the general public and the environment from unacceptable risks” Approved by CLSI Executive Director (2001 March 31) Passed by CLSI Board of Directors (2001 June 26). 11.14.52.1 Rev. 2

  17. Acts and Regulations • The CLS is a federally regulated facility, licensed under the Canadian Nuclear Safety Commission (CNSC) • Operating and construction licenses are posted on HSE Bulletin Boards. • CLSI is required to comply with the: • CNSC Act & Regulations • Construction/operating license conditions • Saskatchewan Occupational Health and Safety Act, 1993 • Saskatchewan Occupational Health & Safety Regulations, 1996 • Other applicable health, safety and environmental laws • Contact the CLSI HSE Department for further information. 11.14.52.1 Rev. 2

  18. Saskatchewan OHS Act & Regulations • The Saskatchewan OHS (Occupational Health and Safety) Legislation states that the worker’s rights are: • to be informed of the hazards at the workplace • to participate in the Occupational Health and Safety Program • to refuse work which the worker believes is unusually dangerous • to work in an environment free from harassment 11.14.52.1 Rev. 2

  19. Saskatchewan OHS Act & Regulations • Under the Saskatchewan OHS legislation the worker’s responsibilities are: • to comply with all policies and procedures and perform work in a safe and healthy manner, with as little impact on the environment as possible • to take an active role in promoting health and safety and protection of the environment • to refrain from activities which may jeopardize the health and safety of others, or the environment 11.14.52.1 Rev. 2

  20. Saskatchewan OHS Act & Regulations • The CLSI responsibilities under the Saskatchewan OHS legislation are: • to ensure the health, safety and welfare at work of all CLS personnel. • to consult and co-operate with the Occupational Health and Safety Committee. • to ensure CLS staff are not exposed to harassment • to co-operate with any person exercising a duty imposed by the Act and Regulations. • to comply with Occupational Health and Safety Act and Regulations. 11.14.52.1 Rev. 2

  21. CLSI OHSC • The CLSI OHSC (Occupational Health and Safety Committee) is formed to: • Help the CLSI identify, assess and control hazards • Provide a channel of communication between the CLSI and CLS staff • Conduct regular inspections • Talk with CLS staff about their health and safety concerns • Help the CLSI develop and monitor policies, plans and programs • Participate in accident investigations and investigations of dangerous occurrences (called “near misses”) • Meet to discuss concerns and make recommendations for corrective actions to discuss with CLSI 11.14.52.1 Rev. 2

  22. CLSI OHS Membership • Members: • Skeeter Abell-Smith (co-chairperson) 657-3574 • John Swirsky (co-chairperson) 657-3567 • Mohamed Benmerrouche 657-3514 • Jeff Cutler 657-3530 • Terry Johnson 657-3573 • Elder Matias 657-3551 • Dean Orosz 657-3575 • Mark de Jong 657-3532 • Reg Aupperle 657-3597 • Jon Stampe 657-3578 • Brian Yates 657-3563 • Matthew Dalzell 657-3739 • Grant Cubbon 657-3515 11.14.52.1 Rev. 2

  23. Module 3 Building Access 11.14.52.1 Rev. 2

  24. Security • Reception hours are Monday through Friday from 8:00 to 16:30. • The main entrance to the lobby will be unlocked during these hours. • All exterior doors are locked at all times except as noted above. • Access to CLS Building and Radiological Controlled Areas are controlled using a Card Access System. • The main entrances are monitored with a Closed Circuit Television (CCTV) System. • Any security concerns should be reported to the HSE Department 227-3113 and Campus Security 966-5555 immediately. • NOTE: Prefix with 9 if using CLS Phones. Card Reader 11.14.52.1 Rev. 2

  25. ID Badge, Access Card and TLD • You will be issued an Identification Badge and a Security Access Card • The Security Access Card will be programmed to give you access into the building and the Free Access Zone. • If required, you will be issued a Radiation Dosimeter - Thermo Luminescent Dosimeter (TLD). • The dosimeter will record your exposure to ionizing radiation. • ID Badge, Security Access Card and TLD must be returned to CLSI User Office when your work is complete. 11.14.52.1 Rev. 2

  26. Hazards • Hazards are mostly confined to areas within RAZ (Restricted Access Zone) and may include: • Chemical/Biological • Electrical/mechanical • Cryogenic • Radiological (ionizing and non-ionizing) • Magnetic • Physical such as Noise, Heights and Ergonomic 11.14.52.1 Rev. 2

  27. Module 4 Emergency Information 11.14.52.1 Rev. 2

  28. Emergency Information • Contact Info for specific emergencies: • Fire/Ambulance 9-911 • Security 9-227-3113/9-966-5555 • Oxygen Alarms 9-227-3113 • Hazardous material Spills 9-227-3113 • Saskatchewan Poison Centre 9-1-866-454-1212 NOTE: The prefix 9 is required when dialing from a CLS telephone. • CLS Building Emergency Contact Info: • U of S Security 9-966-5555 • Health, Safety & Environment 9-227-3113 • Mechanical 9-227-0759 • Electrical 9-230-2803 11.14.52.1 Rev. 2

  29. Building Evacuation • All personnel must leave the building when fire alarm sounds • click to listen to the alarm • Leave the building through the closest exit and assemble at the meeting area near the entrance to the Main Parking Lot (see Map next slide). • During inclement weather, assemble at the Environment Canada Building or the Food Research Building (see Map next slide). • Remain at the meeting area until the all clear signal is given by the CLSI Chief Warden. 11.14.52.1 Rev. 2

  30. Building Evacuation Meeting Place Meeting Area Inclement Weather Meeting Place Inclement Weather Meeting Place 11.14.52.1 Rev. 2

  31. Incident/Accident Reporting • An accident is an unplanned event which results in a fatality, injury, property damage or material loss. • Reporting work injuries is an important key to allow the prompt correction of situations that could have a serious affect on the health and safety of the CLS staff, contractors, users, and visitors. • A work injury is the result of any work-related event, such that a worker needs medical treatment or time away from work. • Reporting of accidents or incidents (near misses) is a requirement under the Saskatchewan Occupational Health and Safety Act & Regulations and the Worker’s Compensation Act. 11.14.52.1 Rev. 2

  32. Injury Reporting • If you are involved in an accident, the injury must be cared for immediately and you must inform your supervisor/CLSI Contact. • Consult CLSI Incident/Accident Reporting procedure 11.7.55.2 for more details or contact CLSI HSE Department. • For a minor injury: • Treat the injury • Record the injury and treatment in the logbook located in a First Aid Kit or in the First Aid Room. • Report the injury to your supervisor/CLSI Contact • Major injury (requires medical attention): • Seek and receive appropriate medical attention • Report the injury to your supervisor/CLSI Contact • Complete Accident/Incident Report form (Form No. 11.11.52.2). • Complete the “Injury Report Form” and Worker’s Compensation Forms (WCB). 11.14.52.1 Rev. 2

  33. First Aid Supplies • The first Aid supplies are kept in: • First Aid Closets - Room 1015 and Room 1060 • First Aid kits - placed at key locations • If you use first aid supplies from the First Aid Closet or any of the kits, complete the First Aid Use Sheet. • The First Aid Use Sheet will be reviewed in case there are complications with the injury and a claim has to be made to WCB. This record will confirm that the injury occurred at work and that you qualify for compensation. 11.14.52.1 Rev. 2

  34. First Aid Closets • First Aid supplies are located in Room 1015 and Room 1060 as shown below. Room 1015 Room 1060 11.14.52.1 Rev. 2

  35. Alarms 11.14.52.1 Rev. 2

  36. Module 5 Hazard Identification and Control 11.14.52.1 Rev. 2

  37. Ionizing Radiation • Radiation, simply defined, is energy transferred through space and matter. • When radiation travels through a medium, it deposits (loses) some of its energy to the medium. • Radiation doses to personnel during operations are primarily the result of secondary radiation caused by the beam striking a target, hardware, or shielding that surrounds the beam line. • The beam pipes and other parts of the machine may become activated during operations. This residual activity is a major source of exposure. 11.14.52.1 Rev. 2

  38. Ionizing Radiation - TLD • TLD is short for Thermo Luminescent Dosimeter. • TLD is used to monitor radiation exposure. • TLD responds to most types of radiation in the same way as tissue. • TLD at the CLS measures exposure to beta, X-rays, Gamma and neutron radiation. • Information required to get a TLD • First and last name, Date of Birth (DOB), SIN, Place of Birth, and Past dose history if applicable – Contact User Office for more info. 11.14.52.1 Rev. 2

  39. Ionizing Radiation • TLD Dose Report • Your quarterly dose report is available upon request from the CLSI HSE Department. • You will be notified if your dosimeter records a radiation dose above the minimum detectable limit. 11.14.52.1 Rev. 2

  40. Ionizing Radiation - EPD • EPD is short for Electronic Personal Dosimeter • EPD is used when immediate dose measurements or dose rate alarm functions are needed. • The electronic dosimeter has a broad dose range and is very accurate. • This dosimeter is issued to escorted visitors who require entry into Radiological Controlled Areas. 11.14.52.1 Rev. 2

  41. Ionizing Radiation • Assigned TLD and any other personal monitoring devices shall be worn on the waist or chest while in the facility. • TLD must be stored in a designated location (badge rack in front lobby or west entrance) when not in use. • Lost/Damaged TLD must be reported immediately to CLSI HSE Department. TLD Storage Rack 11.14.52.1 Rev. 2

  42. Chemical/Biological - WHMIS • WHMIS stands for Workplace Hazardous Material Information System. • WHMIS is a system designed to give employers and workers information about hazardous materials in the workplace. • It is done by identifying and classifying the hazards in the workplace and ensuring consistency of information about hazardous materials. • This information is given through the use of labels, Material Safety Data Sheets (MSDS) and worker training. 11.14.52.1 Rev. 2

  43. Chemical/Biological • The CLS facility has hazardous materials from all WHMIS classes. • Chemical and biological materials can have serious health effects on a worker. • The identity of these materials, the possible health effects and any special precautions are clearly spelled out on the labels or in the Material Safety Data Sheets. • The Hazardous Materials Management Plan (Doc. No. 11.12.55.1) will provide you with the information necessary for the proper storage, handling and disposal of chemicals. 11.14.52.1 Rev. 2

  44. Cryogenic • Liquid helium and liquid nitrogen are used in the Super Conducting Cavity in the Storage Ring and Cryogen-room. • Liquid nitrogen is distributed to beamline enclosures and stations as required • Liquid nitrogen fill station is located at the Loading Dock. • These liquids are extremely cold and can cause severe frost-bite if you come into contact with them. • They also have a high expansion ratio (1:700) and can reduce the oxygen concentration in the air, creating an oxygen deficient atmosphere. 11.14.52.1 Rev. 2

  45. Physical • Noise • The noise in mechanical rooms or around equipment can exceed the Provincial guidelines. The sound levels are measured and signs are posted as required. 11.14.52.1 Rev. 2

  46. Physical • Ultraviolet light • UV light is produced during the welding process. Care must be taken to wear the proper eye and face protection while welding. • Heights • Working at heights above 3 meters requires you to be tied off. 11.14.52.1 Rev. 2

  47. Physical • Forklift • The forklift traveling through the facility can be hazardous for anyone walking, the load being carried could restrict the vision of the operator. Operators must be certified to operate the forklift • Crane • The crane moving back and forth could be carrying loads and creating a hazard overhead. Operators must be certified to operate the Crane. 11.14.52.1 Rev. 2

  48. Physical • Vacuum/Compressed air • The beam pipe is under a high vacuum. An implosion of a vacuum system can generate small flying objects. • There are compressed air lines throughout the building. • Machine shop • Moving parts on equipment, welding, grinding and cutting are some of the hazards found in a machine shops. 11.14.52.1 Rev. 2

  49. Electrical/Magnetic • Electrical Fields • The CLS uses high voltage and current to operate various power supplies. • There are 4 main types of injuries • Direct contact with electrical energy • Electrical arcs • Thermal burns • Muscle contractions causing a worker to fall • Magnetic Fields • Exposure to magnetic fields of extremely low frequency may present a health risk. 11.14.52.1 Rev. 2

  50. Ergonomic Ergonomics is the study of the interaction between you and your workstation. A workstation that doesn’t adjust to your needs could cause serious injuries. 11.14.52.1 Rev. 2