Prologue to Mishap Examination for Managers - PowerPoint PPT Presentation

introduction to accident investigation for supervisors n.
Skip this Video
Loading SlideShow in 5 Seconds..
Prologue to Mishap Examination for Managers PowerPoint Presentation
Prologue to Mishap Examination for Managers

play fullscreen
1 / 32
Download Presentation
desmond-clear
Views
Download Presentation

Prologue to Mishap Examination for Managers

Presentation Transcript

  1. INTRODUCTIONtoACCIDENT INVESTIGATIONforSUPERVISORS

  2. TRAINING OBJECTIVES • Explain the need for Accident Investigations • Explain the benefits of Accident Investigations • Provide the information necessary to properly complete Accident Investigations • Provide the tools necessary to properly complete Accident Investigations

  3. WHAT IS ACCIDENT INVESTIGATION? • Process to determine the underlying causes of accidents • Causal information used to identify and take preventive action • Basic component of loss prevention

  4. BENEFITS OF ACCIDENT INVESTIGATION ? GROUP DISCUSSION

  5. BENEFITS OF ACCIDENT INVESTIGATION... • Prevention of future, similar losses • Contribution to the bottom line • Reduction of human suffering • Continuous improvement process

  6. WHY DO ACCIDENT INVESTIGATIONS FAIL ? GROUP DISCUSSION

  7. WHY ACCIDENT INVESTIGATIONS FAIL... • Lack of time to complete • Lack of motivation to complete • Lack of accountability • Lack of skills & knowledge • Investigation stopped short and didn’t reveal all causes of the accident

  8. ROLES & RESPONSIBILITIES • Branch Management • Safety Director • Supervisors • Task Force / Committee

  9. DEFINITION OF KEY WORDS • Accident / Incident • Frequency / Severity • Exposure / Control • Illness / Injury • Property Damage • Near Misses • Root Causes • Contributory Causes

  10. PRE-ACCIDENT PLANNING • Clearly defined roles and responsibilities • Training of key staff members • Communications established • Standard procedures established • Necessary equipment and forms on hand

  11. WHICH ACCIDENTS NEED TO BE INVESTIGATED ? • Injury? • Illness? • Property damage? • Near miss? RECORD YOUR ANSWERS !

  12. WHICH ACCIDENTS NEED TO BE INVESTIGATED ? • Injury? • Illness? • Property damage? • Near miss? ANSWER: ALL OF THE ABOVE !

  13. ACCIDENT INVESTIGATION:A 6-STEP PROCESS • Collect Information • Analyze All Causes • Assess Future Accident Potential • Develop Corrective Action • Report Data and Recommendations • Take Corrective Action and Monitor

  14. STEP 1 COLLECTING INFORMATION ON-SITE: • Securing the scene • Investigating at the scene • Recording key information • Equipment is needed...

  15. STEP 1 ACCIDENT INVESTIGATION KIT • Camera • Measuring tape • Barricade tape • Plastic vials with caps • Graph paper • Accident investigation forms

  16. STEP 1 COLLECTING INFORMATION OFF-SITE: • Interview key people • Assess past accident history • Review pertinent records

  17. STEP 1 INTERVIEWING TIPS • Put the person at ease, explain purpose • Fact-finding process, don’t assess blame • Ask open-ended questions • Investigating the accident vs.disciplining the employee

  18. STEP 1 REVIEWING RECORDS • Standard Work Practices • Job Safety Analysis • Material Safety Data Sheets • Employee Personnel Records • Maintenance Logs • Past Accident History • Inspection Records • MVRs

  19. STEP 2 DETERMINING CAUSES • The root cause is the most fundamental and direct cause of an accident or incident • There may be one or more contributory causes, in addition to the root cause • Accident Investigation is ineffective unless all causes are determined and corrected

  20. STEP 2 CATEGORIES OF ROOT CAUSES Can be classified as: • Workplace Factors - Largely a function of Management Practices • Employee Factors - Largely a function of Employee Behavior

  21. STEP 2 CATEGORIES OF ROOT CAUSES • Workplace Factors: Examples- Improper Tools & Equipment- Inadequate Maintenance- Lack of Job Procedures- Poor Workstation Set-Up- Poor Housekeeping- Lack of Job Supervision- Lack of Job Training

  22. STEP 2 CATEGORIES OF ROOT CAUSES • Employee Factors: Examples- Failure to Apply Training- Task Exceeds Physical, Mental Capabilities- Risk-Taking Behavior- Fitness for Duty (Substance Abuse, Fatigue, Effects of Medication, Emotional Distress)

  23. STEP 2 DETERMINING ROOT CAUSES • After answering Who, What, Where, When and How initially, this step answers Why and “completes the puzzle” • Don’t Stop Short !

  24. STEP 3 ASSESS FUTURE POTENTIAL • Assess Severity- Class A Hazard (Major)- Class B Hazard (Serious)- Class C Hazard (Minor)

  25. STEP 3 CLASS “A” HAZARD (MAJOR) • A condition or practice likely to cause permanent disability, loss of life, body part and/or extensive property loss or damage

  26. STEP 3 CLASS “B” HAZARD (SERIOUS) • A condition or practice likely to cause serious injury or illness (resulting in temporary disability) or property damage that is disruptive, but less severe than Class A

  27. STEP 3 CLASS “C” HAZARD (MINOR) • A condition or practice likely to cause minor (non-disabling) injury or illness or non-disruptive property damage

  28. STEP 4 CORRECTING THE CAUSES • Control(s) must directly address each cause identified • Consider short term controls if permanent controls are not readily available • More than one control may be needed • Use the “Control Hit List” to make sure that the “best” control has been found

  29. STEP 4 THE CONTROL HIT LIST 1. Eliminate the Hazard 2. Substitute a less hazardous material 3. Use Engineering Controls 4. Use Administrative Controls 5. Personal Protective Equipment (PPE) 6. Training of Employees

  30. STEP 5 REPORT DATA & RECOMMENDATIONS • Document facts only • Determine if the corrective action applies to more than one employee, more than one job function, more than one shift, etc. • Prioritize corrective actions based on future accident potential • Submit both short term and long term solutions, if necessary

  31. STEP 6 TAKE ACTION & MONITOR • Ensure that long term solutions don’t get “lost in the shuffle” • Evaluate the effectiveness of implemented controls:- Interview Employees- Job Safety Analysis- Accident / Incident Experience

  32. WHY ACCIDENT INVESTIGATIONS FAIL... • No time to complete • No motivation to complete • Lack of accountability • Lack of skills & knowledge • Investigation stopped short and didn’t reveal the root causes of the accidentWHICH OF THESE WILL BE AN OBSTACLE FOR YOU?